LEARN

What is a spectrum analyzer?

An audio spectrum analyzer shows which frequencies are in a sound and how loud each one is, live, while it plays. Low notes sit on the left, high notes on the right, and the louder a frequency is, the higher the line goes.

What a spectrum analyzer shows

Think of it as a picture of the sound right now. A kick drum makes a tall bump on the far left. A bright hi-hat lifts the far right. A voice sits in the middle, with smaller bumps above it where its overtones are.

You will also see it called a frequency analyzer or a spectral analyzer (spectrum analyser in the UK). In audio they all mean the same tool.

How it works

The analyzer takes a short slice of the audio and runs an FFT on it, a bit of maths that splits the slice into its frequencies. It does this many times a second, so the line keeps moving with the music.

Most audio analyzers use a logarithmic frequency axis. Every octave gets the same width, which matches how we hear: the step from 50 Hz to 100 Hz looks as big as the step from 5 kHz to 10 kHz.

The axis stops at half the sample rate, because that is the highest frequency a digital recording can hold. At 44.1 kHz it ends near 22k, at 48 kHz near 24k.

What it is used for

Mostly for the things your speakers or your room hide. Small speakers and laptop speakers barely play the lowest octave, so an analyzer is often the only way to see how much sub bass is really there.

  • Checking the low end: how deep the bass goes and whether the kick and the bass pile up on the same notes.
  • Finding a ringing resonance: a narrow peak that stays put while everything else moves.
  • Comparing your mix with a reference track you like.
  • Learning: seeing the harmonics of an instrument or a voice.

Spectrum analyzer vs spectrogram

A spectrum analyzer shows one moment. A spectrogram shows the same information over time, so you can see how the sound changes from one beat to the next. 3D SPACE shows both: its 2D view is a spectrum analyzer, and its 3D view is a 3D spectrogram, where the spectrum becomes a landscape that moves through time.

3D SPACE
The 2D view in 3D SPACE: a live spectrum line with peak labels.

How to use the spectrum analyzer in 3D SPACE

  1. 1.Put 3D SPACE on the track you want to look at, or on your master.
  2. 2.Click 2D. The line shows the spectrum of whatever is playing through the plugin.
  3. 3.Turn on Peak Hz Labels to name the loudest frequencies and their level.
  4. 4.Use the Zoom fader to get closer to the part of the spectrum you care about.
  5. 5.Switch to 3D to watch the same analysis as a landscape over time.

QUESTIONS

Is a frequency analyzer the same as a spectrum analyzer?

In audio, yes. Frequency analyzer, spectral analyzer and spectrum analyzer are different names for the same kind of display.

Do I need a spectrum analyzer to mix?

Your ears come first. An analyzer helps with what your speakers or your room cannot show you, like the lowest octave or a narrow resonance.

How accurate is the analyzer in 3D SPACE?

It uses an 8192-point FFT on logarithmic bands, calibrated in dBFS, and the frequency axis follows your session's sample rate.

Does a spectrum analyzer plugin change the sound?

It should not. 3D SPACE only reads the audio: the signal passes through bit for bit, with 0 samples of latency.

3D SPACE

See what your mix looks like.

One-time $39.99. No subscription.

See everything 3D SPACE does