LEARN
How to read a spectrum analyzer
A spectrum analyzer graph looks busy at first, but it only has two things to read: where a sound sits from low to high, and how loud it is. Here is how to read it while you mix.
The two axes
Left to right is frequency, in hertz. Bass is on the left, around 30 to 100 Hz. Voices and most instruments fill the middle. Cymbals, air and sparkle live on the right, from about 5 kHz up.
Up and down is level, in decibels. The higher the line, the louder that frequency is. In 3D SPACE the level is calibrated in dBFS, the same scale your DAW's meters use.
Why the graph stops at 22k or 24k
A digital recording can only hold frequencies up to half its sample rate. So the axis ends near 22k at 44.1 kHz, 24k at 48 kHz and 48k at 96 kHz. 3D SPACE sets this on its own from your session.
What to look for
A few things are worth checking on almost every mix.
- The lowest octave: how deep the bass goes, and whether there is rumble below it that nobody will hear.
- Kick and bass: if both have their biggest bump on the same notes, they will fight.
- Resonances: a narrow spike that stays in place while the music moves is often a ringing note in a room or a synth.
- The top end: whether the mix is dull or harsh compared with a song you like.
Do not mix to a flat line
Music is not flat on an analyzer, and it should not be. Most good mixes slope down from left to right. Use the analyzer to confirm what you hear, or to see what your speakers cannot play, then decide with your ears.
It also helps to watch over time. In 3D SPACE's 3D view the spectrum becomes a landscape that moves through time, so you can see how the low end moves across a few bars, not just in one instant.
How to compare your mix with a reference
- 1.Put 3D SPACE on your master and open the 2D view.
- 2.Turn on Peak Hz Labels so the loudest frequencies are named.
- 3.Play the loudest part of your mix and note where the low end peaks.
- 4.Open the reference song in the standalone app, loop the same part, and compare the shape.
- 5.Fix what you hear first, then check again.
QUESTIONS
What is a good spectrum for a mix?
There is no target line. Most mixes slope down from the bass to the treble. Compare with a reference in the same style.
Why do the peak labels jump around?
On some analyzers they do. 3D SPACE's Peak Hz Labels stay calm on busy material, and Smoothing calms the line itself.
Is there a preset for mixing?
3D SPACE comes with one called Mix Check, among its 15 built-in presets.
Can I leave the analyzer on the master?
Yes. 3D SPACE only reads the audio, with 0 samples of latency, and it only draws while its window is open.